Plank Type Flooring

Plank type flooring

Plank type flooring is used for all types of industrial flooring, mezzanine floor structures, walkways etc. Plank type flooring copes with span widths up to 2 metres, which means that the supporting beams can be arranged at wider distance and the erection work carried out faster.

The illustration to the right shows plank type flooring compared to grating and chequered plate.

Plank type flooring weighs 21.8 kg/m2 only. Customary chequered plate including extra supporting weighs 50 kg/m2 or more. Plank type flooring is hot dip galvanized as standard and is manufactured in closed, open, slit or perforated versions.

Advantages of Plank type flooring

  • Excellent economic efficiency thanks to low weight and longer spans allowed for pedestrian traffic.
  • Easy to adjust and adapt on site.
  • Good anti-slip protection for plank type flooring is better in the slit or perforated version (LDS and LDP).
  • Plank type flooring type LDH, LDS and LDP provide good drainage, but without the same open impression as open steel flooring when applied on high levels.
  • Finished flooring with closed surface (LDT) does not require additional building-up.
  • Flexible handling thanks to low weight.

Wide Spans and simpler Supporting Structure

Plank type flooring represents a strong and light construction, allowing for spans of up to 2000 mm. Considerable savings on material can be achieved by employing simpler structures and supports at larger distances than those used for other types of industrial flooring. With spans exceeding 1500 mm the planks should be coupled together.

Easy to handle, easy to install

Thanks to the low weight of the profiles (300 mm width = 7.4 kg/m) the installation is simplified as the planks can be laid by hand, without any help from crane or other lifting devices.

The planks are hooked together and fixed to the supporting beams by thread-pressed screws.

Read more about fixings

Shaping/Planning

We can cut and work the planks entirely to require-ment. It is an advantage to have this work carried out in our factory before hot dip galvanizing to achieve best possible results. Where the bearing edge is cut through, the plank must be re-inforced by a LU profile.

We assist with the design of your plank type flooring and even of the supporting structure.

Contact us at an early stage.

Stock

The length of 6000 mm is stocked in untreated stainless steel, hot dip galvanized approx. 1 wk delivery.
Custom-made lengths according to your wishes are non-stock items.

Surface treatment

Plank type flooring is hot dip galvanized in accor-dance with SS-EN ISO 1461, as standard.

Read more about surface finishes



Profiles, Plank type flooring

Plank type flooring is manufactured in 4 different patterns, 2 different profiles, and 3 different widths. We can supply plank type flooring in different lengths, up to 6000 mm.

Construction profiles – type B

Plank type flooring has a construction profile that is 300 mm wide. The profiles hook into each other and are locked during installation.


End profiles – type A

End profiles are used to obtain the exact width and as finish along the edges. The desired construction dimensions can be obtained using the construction profiles.



Plank types, Plank type flooring

Plank Type Flooring LDT (closed)

Properties:
This type of plank type flooring has an embossed pattern giving good anti-slip properties.

Applications:
In all places where a closed flooring is required. Thanks to their closed structure the planks can be equipped with sound-proof material arranged on or underneath the grate. The 6000 mm length is held in stock.

Building Profiles Border Profiles

300 mm

200 mm

 

250 mm

 

300 mm

These products are available:

Stocked

 

Made to measure

Closed plank type flooring, LDT
ZoomIn

Plank Type Flooring LDH (open)

Properties:
Is principally designed similar to the plank type flooring with closed surface, but with punched oval holes 115x69 mm to let through light, dirt and liquids.

Applications:
Where a relatively even, but nevertheless pervious floor is required. Suitable in cases where wheeled devices are in use. The 6000 mm length is held in stock.

Building Profiles Border Profiles

300 mm

200 mm

 

250 mm

 

300 mm

These products are available:

Stocked

 

Made to measure

Holed plank type flooring, LDH
ZoomIn

Plank Type Flooring LDS (serrated slits)

Properties:
Similar to the type LDH plank type flooring with excellent pervious properties. The serrated top face offers extremely good safety resistance to slipping.

Applications:
In situations with extremely high demands for anti-slip safety. The 6000 mm length is held in stock.

Building Profiles Border Profiles

300 mm

200 mm

 

250 mm

 

300 mm

These products are available:

Stocked

 

Made to measure

Slit plank type flooring, LDS
ZoomIn

Plank Type Flooring LDP (Perforated)

Properties:
Very good anti-slip properties, but not as pervious as the LDS. This type of flooring has smaller holes (10 mm dia. and 4 mm drainage holes) and consequently is safer against the risk of objects falling through the holes.

Applications:
In situations with high demands for anti-slip safety and safety requirements with reduced risk of objects falling through the openings. The 6000 mm length is held in stock.

Building Profiles Border Profiles

300 mm

200 mm

 

250 mm

 

300 mm

These products are available:

Stocked

 

Made to measure

Perforated plank type flooring, LDP
ZoomIn


Accessories for plank type flooring

Kick strip

Kick strip LK140 is a special profile, located at all openings and all outer edges of the plank.


Corner for kick strip

Outside and inside corners at 90° angles are available for kick strips.


Rubber Strip

Installed in the joints between the planks (LDT) as a seal and to provide sound and vibration insulation.


Reinforcement profile

Profile LU43 is used as reinforcement, plank edging and as a border profile in the case of longitudinal cutting of the plank.


Sound Insulating

Insulating boards are installed under the planks and secured with clips.



Search for images
   
Show page of 1

Results are filtered at: 

  • lattdurk-slitsdurk1_5558.jpg

    lattdurk-slitsdurk1_5558.jpg

    Footbridge with plank type flooring LDT over motor racing track.

    04/01/2006


    Included in gallery:

    Plank type flooring

  • aw0298.jpg

    aw0298.jpg

    18/09/2013


    Included in gallery:

    Plank type flooring

  • lattdurk-slitsdurk5_aw293.jpg

    lattdurk-slitsdurk5_aw293.jpg

    04/01/2006


    Included in gallery:

    Plank type flooring

  • lattdurk-slitsdurk9.jpg

    lattdurk-slitsdurk9.jpg

    06/04/2010


    Included in gallery:

    Plank type flooring

  • aw2178.jpg

    aw2178.jpg

    18/09/2013


    Included in gallery:

    Plank type flooring

  • lattdurk-slitsdurk4_5741.jpg

    lattdurk-slitsdurk4_5741.jpg

    Plank type flooring LTD (closed surface) covering opening in concrete floor.

    04/01/2006


    Included in gallery:

    Plank type flooring

  • lattdurk-slitsdurk7.jpg

    lattdurk-slitsdurk7.jpg

    Treads and floor of plank type flooring LTD (closed surface) across production line.

    04/01/2006


    Included in gallery:

    Plank type flooring

  • ag1725.jpg

    ag1725.jpg

    18/09/2013


    Included in gallery:

    Plank type flooring

  • lattdurk-slitsdurk3.jpg

    lattdurk-slitsdurk3.jpg

    04/01/2006


    Included in gallery:

    Plank type flooring

View gallery

Sales Sweden

Which seller should I contact? (xxxxx)

Fax direct number: +46 (0)371-344 78

Fredrik Albinsson

Direct Telephone Line: +46 (0)371-344 70

E-mail: fredrik.albinsson@weland.se

Vcard: vCard

Mattias Andersson

Direct Telephone Line: +46 (0)371-344 07

E-mail: mattias.andersson@weland.se

Vcard: vCard

Alexander Johnsson

Direct Telephone Line: +46 (0)371-344 49

E-mail: alexander.johnsson@weland.se

Vcard: vCard

Jakob Josefsson

Direct Telephone Line: +46 (0)371-344 31

E-mail: jakob.josefsson@weland.se

Vcard: vCard

Göran Lagesson

Direct Telephone Line: +46 (0)371-344 47

E-mail: goran.lagesson@weland.se

Vcard: vCard

Stefan Lingtell

Direct Telephone Line: +46 (0)371-344 43

E-mail: stefan.lingtell@weland.se

Vcard: vCard

Björn Sandwall

Direct Telephone Line: +46 (0)371-344 67

E-mail: bjorn.sandwall@weland.se

Vcard: vCard

Oscar Welandson

Direct Telephone Line: +46 (0)371-344 98

E-mail: oscar.welandson@weland.se

Vcard: vCard

Johan Palm

Direct Telephone Line: +46 (0)371-344 69

E-mail: johan.palm@weland.se

Vcard: vCard

Sales export

Fax direct number: +46 (0)371-344 78

Jonas André

Direct Telephone Line: +46 (0)371-344 08

E-mail: jonas.andre@weland.se

Vcard: vCard

Hans Larsson

Direct Telephone Line: +46 (0)371-344 03

E-mail: hans.larsson@weland.se

Vcard: vCard